Fast Prints USA

Design 1

Artwork

Upload your artwork

PDF only — vector artwork preferred

* Artwork upload required before adding to cart

Quantity
Dimensions
Finishing add-ons

Welding

Included free

The banner edges are heat-welded (not just hemmed) for a stronger, cleaner finish. Required if you're adding rope.

Grommets

Included free

Metal rings punched through the banner edge so you can hang it with rope, zip ties, or bungee cords. The most common way to hang a banner outdoors.

Pole pocket

+$1.70/linear ft + $17 setup (once per order)

A sewn sleeve along the top (or bottom) edge that a pole slides through. Great for trade show displays, storefront banners, and anywhere you're using a pole or stand.

To add pole pocket, you must first remove grommets, welding, and rope.

Rope

+$1.70/linear ft

500 lb nylon cord welded into the top or bottom edge with 2 ft of slack on each end — for tying to fences, posts, or structures.

To add rope, you must first add welding, remove grommets, and remove pole pockets.

Webbing

Edge Webbing

$1.70/LINEAR FT

Reinforced sewn edge along top and bottom. Recommended for banners wider than 8 feet.

Webbing coming soon — contact us for manual orders.

Product preview

Top of image

60"

36"

8oz coated polyester 37% airflow — Single-Sided

Grommets: top & bottom

Keep text & logos inside the red line — edges may be trimmed by grommets or welded folds (1.25")

8oz coated polyester 37% airflow · $4.15 / sq ft · 15.0 sq ft


  • Per unit$62.25
  • Quantity1

$62.25 total

Taxes calculated at checkout

Upload your artwork to continue

Mesh at a glance

Open mesh banners for indoor and outdoor displays, with hanging and edge-reinforcement options.

Material
8oz coated polyester mesh with 37% airflow.
Printing and use
Single-sided printing for indoor and outdoor use.
Size and quantity
Enter a shared size for your designs. Banners wider than 16 feet are produced as welded panels.
Finishing
Welding, grommets, pole pockets, rope and webbing are available subject to compatibility. Wind slits are not offered on Mesh.

Specifications & Product Details

Material and printing

8oz coated polyester mesh with 37% airflow. Single-sided printing for indoor and outdoor use.

Sizes and quantities

Enter a shared size for your designs. Banners wider than 16 feet are produced as welded panels.

Finishing options

Welding, grommets, pole pockets, rope and webbing are available subject to compatibility. Wind slits are not offered on Mesh.

Artwork preparation

The first Design 1 PDF sets the shared banner dimensions. Check the size after uploading. Additional designs use the same size, material and finishing, with their own artwork and quantity.

Production and delivery

Check the live estimate for production, delivery and any rush options available for your configuration. Selected options and quantities can affect the estimate.

Frequently asked questions

Does Mesh need wind slits?

Wind slits are not offered on Mesh. The mesh material already allows airflow; webbing is an available edge-reinforcement option.

What artwork should I prepare?

The first Design 1 PDF sets the shared banner dimensions. Check the size after uploading. Additional designs use the same size, material and finishing, with their own artwork and quantity.

When will my order arrive?

Check the live estimate for production, delivery and any rush options available for your configuration. Selected options and quantities can affect the estimate.

Compare all products in this category